成品氫氧化鉀的存在形式一般為各種形狀，如片狀、顆粒狀等。所以使用時溶解起來比堵塞更方便。所以我們在使用時對成品的要求往往更高。因為切片質量影響使用時的溶出率，所以對產品的切片工藝有嚴格的標準。

The finished potassium hydroxide generally exists in various shapes, such as flake, granule, etc. Therefore, it is more convenient to dissolve than to block. Therefore, we often have higher requirements for finished products when using them. Because the quality of the slice affects the dissolution rate in use, there are strict standards for the slicing process of the product.

1.先要保證氫氧化鉀切片后的產品橫截面位置比較完整，沒有一些明顯的缺口和凸起，表面很少有刀痕和由于切片處理而產生的裂紋。

1. First, ensure that the cross section position of the product after potassium hydroxide slicing is relatively complete, without some obvious notches and bulges, and there are few knife marks and cracks caused by slicing on the surface.

2.切片時還要求精度高，包括來自切割的產品厚度差要求在一定范圍內，切割結束后不能有氫氧化鉀翹起

2. When slicing, it is also required to have high precision, including that the thickness difference of products from cutting should be within a certain range, and there should be no potassium hydroxide rising after cutting

3.很多產品在切片的時候會有一些不合格的產品，但是我們在加工的時候需要盡可能的提高合格的概率，這樣我們的效率才會顯著提高。

3. Many products will have some unqualified products when slicing, but we need to improve the probability of qualified products as much as possible during processing, so that our efficiency will be significantly improved.

4.切片時，我們可以選擇更高的設備進行加工，這樣加工的效率就會提高。而且可以降低原材料的消耗。

4. When slicing, we can choose higher equipment for processing, so that the processing efficiency will be improved. It can also reduce the consumption of raw materials.

以上是氫氧化鉀切片的標準，因為如果我們使用的產品切片效果更好，我們使用時也會有更好的溶解效果。更多相關產品的內容就來我們網站http://m.ileleli.cn進行咨詢吧！

The above is the standard for potassium hydroxide slicing, because if we use the product with better slicing effect, we will also have better dissolution effect when using it. More relevant product content will come to our website http://m.ileleli.cn Consult!